FAQ

Selection Guide 1.Key factors for selection Load type: radial/axial/combined load. Environmental conditions: temperature, humidity, risk of chemical corrosion. Movement mode: continuous rotation, oscillation or intermittent motion. 2.Installation considerations Tolerance fit: H8/g7 or H7/f7 clearance fit is recommended. Surface treatment: Ra≤0.8μm is recommended for shaft surface to reduce wear. Avoid edge pressure: Ensure even load distribution.

How can guide shaft support seat help improve production line efficiency by 30%? 1.Industry pain points Problem 1: Vibration under high-speed movement leads to positioning deviation (such as mechanical arm repetition accuracy > 0.2mm). Problem 2: Traditional support seat has short life and is frequently replaced (once every 6 months on average). 2.Our solution Technical

The ball screw support seat is an important part of the ball screw system. It is mainly used to fix and support the screw to ensure that it maintains stable operation under high load and high speed conditions. High-quality support seats can effectively reduce vibration and axial movement and extend the service life of the

Selection is a key step to ensure the best performance of the ball screw, and comprehensive considerations are required: Load: The size and direction of axial load (thrust), radial load, and moment load. This determines the nominal diameter of the screw and the specification of the nut. Accuracy level: According to the requirements of the

What is a slide? What are its types? Answer: A slide is also called a displacement table, which refers to a component product with three mechanisms: guiding, feeding, and clamping. The slide is easy to position and adjust, so it can be used for tooling and fixtures for inspection, processing, and assembly processes.Slides are usually

Locking nut is a kind of nut widely used in machinery and other industries. Its working principle is to use the friction between the nut and the bolt for self-locking. However, the reliability of this self-locking will be reduced under dynamic load. In some important occasions, we will take some anti-loosening measures to ensure the

1.What are the models of ball screw support seats? Answer: The ball screw support seat is divided into a fixed side and a supporting side. It is a core component of precision machinery and is usually called a screw fixed seat. Its most basic models are square AK, AF, BK, BF, EK, EF and round

Q: What is a trapezoidal screw? A: A trapezoidal screw is a sliding screw with a trapezoidal thread. Usually, a 30-degree trapezoidal screw means that the angle of the extended line of the thread section is 30 degrees. Trapezoidal screws are divided into left-handed and right-handed threads. The most commonly used in reality is the

Introduction to commonly used metal materials and surface treatments for mechanism components Metal materials 45 steel: has good comprehensive mechanical properties, moderate strength and toughness, and is widely used in various types of mechanism installation components, such as some positioning pins, shaft components, etc. Stainless steel: Common models include SUS304 and other models, which have