Correctly install the ball screw support seat to ensure long-term stable operation of the equipment
The installation quality of the ball screw support seat directly affects the accuracy and life of the transmission system. The following are key points to note during installation:
Installation steps:
Cleaning and inspection: Ensure that the installation surface is free of burrs and dust, and check the matching of the support seat and the screw.
Centering adjustment: Use a micrometer to check the parallelism of the screw and the guide rail to avoid eccentric loading.
Preload setting: Appropriate preload should be applied to the fixed end support seat to reduce axial movement.
Lubrication and sealing: Add an appropriate amount of grease and check whether the sealing ring is intact.
Common problems and solutions
Abnormal noise or vibration: It may be caused by damage to the support seat bearing or improper preload, and needs to be readjusted or replaced.
Excessive temperature rise: Check whether the lubrication is sufficient or the preload is too large.
Correct installation and debugging can maximize the efficiency of the ball screw system.